Permanent torque up to 461 Nm and peak torque up to 1745 Nm

Possibility to use a hollow shaft up to 70 mm diameter

Low speed rotation, from 800 to 190 rpm depending on type

Position signal with high resolution: up to 393612 points per revolution

High accuracy resolver: +/- 1 arc min

Optionally: sine / cosine or TTL encoder

No reducer

No backlash

High accuracy servo

Suppression of maintenance

Simplification of the mechanism

Noise reduction

The Brushless Motors ALXION FC range was specially designed for direct drive applications on axis without reducers.

The series include 7 main models performing continuous torque ranging from 14.3 Nm to 460 Nm, and peak torque ranging from 42.6 Nm to 1745 Nm.

Thanks to the optimization of electromagnetical, mechanical and thermal characteristics, the continuous torque-to-weight ratio reaches up to 2.3 Nm/kg and the peak torque-to-weight ratio is up to 8.3 Nm/kg.

Due to the high thermal inertia, the peak torque is available during a time only limited by the overload capability of the drive, i.e. from 2 to 5 sec as standard.

The torque/speed characteristics allow to reach the peak torque without fading with a speed equal to or greater than 2 RPS.

The peak power can therefore reach up to 20 kW.

FC Motors Version 230 Vac Continuous torque at stall: from 14.3 Nm up to 461 Nm Peak torque: from 42.6 Nm up to 1745 Nm Rated speed: from 210 Nm up to 800 RPM   Technical characteristics FC Motors Version 230 Vac Torque / speed characteristics Motors FC Version 230 Vac

Motors Version 400 Vac / 460 Vac Continuous torque at stall: from 14.3 Nm up to 461 Nm Peak torque: from 43.8 Nm up to 1745 Nm Rated speed: from 190 Nm up to 800 RPM   Technical characteristics FC Motors Version 400 Vac / 460 Vac Torque / speed characteristics Motors FC Version 400 Vac / 460 Vac

Dimensions Dimensions 170 FC / 290 FC / 390 FC

Radial loads Radial loads 170 FC / 290 FC / 390 FC

Connectors description Power connectors / Resolver connectors

Schema of the FC motor Schema